![Fermitan Service water/Drinking water](assets/images/7/Fermit_Fermitan_Brauchwasser-dae299c7.png)
Fermitan Service water/Drinking water
Anaerobic sealant for cylindrical and conical metal threads in the sanitary field and installation work
Temperature range: -30°C to +150°C (briefly up to +170°C)
-30°C up to +40°C in the case of copper, bronze, gunmetal
Maximum pressure: 200 bar after polymerisation
At 20°C: 4 bar after 15 min., 30 bar after 2 hrs.
Polymerization time: 1-3 hours depending on thread diameter
Max. thread diameter: 2 inches / max. thread play: 0,25mm
Colour: whitish / Strength: medium strong
Processing temperature: over 10°C
Coverage: 1 bottle with 75 ml of adhesive is sufficient for approx.. 100 1-inch threads
Storage: at +5°C to + 25°C
Shelf-life: 18 months
Use without hemp |
Enriched with PTFE |
Suitable for hot water/cold water/steam in sanitary facilities and heating |
Can be used for metal, steel, stainless steel, copper, copper alloys such as bronze, brass or gunmetal |
Can be quickly exposed to pressure again |
Removable as far as thread diameters of 1“ |
Very good resistance to water hammer |
Can also be used as a mediumstrength screw lock |
Article | PU | Order no. |
---|---|---|
75 ml bottle | 6 | 05001 |
Also suitable for drinking water (in accordance with the information from the German Federal Office of the Environment (UBA)
dated 11.02.2016 “Hygiene assessment of anaerobic adhesives in contact with drinking water”)